The Graupner Polaron PRO DC charger is a dual port charger providing max 500W on port one and 30W on port two (at 24v) It can charge two batteries simultaneously such as LiPo on port one and NiMh/NiCd on port two. The Polaron PRO can also charge split packs of up to 14S making it the ideal charger for those who are using high voltage setups in large size airplanes and helicopters. The Polaron PRO DC uses an easy to use colour and 3.0 touch TFT LCD screen making operation and menu navigations easy.
The charger will automatically setup the optimal charge profile after entering the battery type, cell numbers and battery capacity ensuring efficient and safe charging. Each charge channel can different charge profiles eliminating the need to re-enter battery information.
Just load the required battery profile and press charge. Charging is done safely with the supplied balancing boards where the batteries are constantly being monitored for optimal charge capacity. The supplied temperature sensors will add extra safety when charging batteries at a higher charge rates. Batteries can be placed in store mode which will prolong the cycle-life when the batteries are not in use.The supplied USB cable can be used to update the chargers software or with a desktop computer to monitor charging with our free monitoring software. Polaron PRO DC Charger with stand 2 x EH to XH 7S balancing boards and cables 2 x Temperature sensors 2 x Charge cable 2 x Alligator clip Stylus pen USB cable DC input cable Manual. Please refer to photo for image of included cables. You will need to get your own Tamiya / Traxxas / Deans, etc adaptor or cable to suit your batteries. This charger is DC powered. It works with a DC power source such as car battery or DC power supply. It does not connect direct to home AC power sockets. User friendly 3.0 colour and touch TFT LCD Screen. Built in servo and sensored motor tester. Port CH1 charges LiPo, LiLo, LiFe (1 to 14 cells), NiCd, NiMh (1 to 32 cells), Pb (1-12 cells).
Port CH2 charges NiCd and NiMh (1 to 8 cells). Discharge current 60W on CH1, 5W on CH2. External USB charge port 5v 2.5A. Supports high voltage LiPo battery charging.
Support for parallel charging of multiple batteries on a single channel. 30 battery profile memory on CH1, 10 battery profile memory on CH2. USB data port for firmware updates and PC charger monitoring. X 196.3 x 88.2 mm. DC 11.0-28.0 Volts.00 / 30 Watts max at 24v. Discharge Circuit Power: 60 / 5. Display: TFT 3.0 Colour LCD W/ Touch screen. USB 5V output (5.0V 2.5A) / USB B-Type. Sub Functions: Servo Test, Sensored Motor Test, Warmer. Firmware upgrade: External Mini USB device. PC communication: Data Monitoring and Logging. Languages: English Default, other languages with firmware update. Cooling system: 50x50x10mm x 2 Dynamic Cooling Fan. Module socket: Futaba 3P socket, Motor Test socket, ZHR, Servo Test socket, Futaba 3P socket. The item "NEW GRAUPNER POLARON PRO DC 500W DUAL CHANNEL RC BATTERY CHARGER NIMH NICD LIPO" is in sale since Thursday, August 1, 2019. This item is in the category "Toys, Hobbies\Radio Control & Control Line\RC Model Vehicle Parts & Accs\Control, Radio & Electronics\Chargers". The seller is "hobbyspare" and is located in Victoria. This item can be shipped worldwide.