Ctek MXS25 Successor PRO25S Charger Also for Lithium Start Stop Efb Batteries. The description of this item has been automatically translated. The CTEK PRO25S 12V/25A is a fully automatic 8-stage charger with maintenance charge function and continuous current mode. Suitable for all 12 volt batteries, also LiFePO4 (lithium) EFB (start and stop) batteries. A professional all-rounder for normal and very large batteries of all kinds.The CTEK PRO25S is the perfect choice for batteries, the quickly charged or permanently monitored should be. In contrast to its predecessor, the MXS25, also the latest generations can with the PRO25S LiFePO4 (lithium ion) and EFB (start stop) Batteries are charged. The use in the Free is not a problem , because it is according to IP44 splash-proof. To complete the package, it is also Robust and tough , making its field of application are virtually no limits.
It is an extremely wide use in diverse industries ranging from automotive workshops, showrooms, racing teams, agriculture, construction, municipal communities, fire brigades, THW, public service, police, etc.. Suitable for all 12 volt batteries 40 Ah 30 Ah for lithium batteries. Lead acid batteries and wet-cell batteries (the most used type of battery). For each type of battery, the PRO25S offers a special charging mode, so that each battery is charged according to your individual requirements. Only lithium battery mode must be selected manually, batteries, all other batteries are detected by the charger and the automatically selects the appropriate charging characteristics.With the "supply" mode delivers the charger current, even without a battery is connected. It serves also as a power source for Diagnosis and troubleshooting and provides the vehicle to continue to disconnect the battery power. Thus, all important configuration data to the onboard and radio are preserved. The integrated temperature sensor adjusts the charging rate depending on the ambient temperature on the charger, to achieve a maximum charging performance.
Higher temperatures reduce the charging voltage, lower temperatures increase them. The temperature sensor is next to the terminal cable attached to a cable, and can therefore measure the temperature directly at the battery. The "Recond" mode allows you to undo the acid stratification, which in older and deep discharged batteries the Restored power battery and prolongs the life of. This re conditioning program is recommended for older, already sagging or deep-discharged batteries.
It can in all kinds: wet rooms, CA/CA (calcium), AGM battery are used, should batteries be not applied but when gel. Lithium-ion (LiFePO4) batteries is the Recond mode irrelevant and thus not selectable. These days are all modern vehicles with a CAN bus system equipped. That open a door or turning on the radio will cause that the system becomes active. Already for mid-size cars, currents can flow approx.This can cause that the battery State of charge is so bad after maintenance work that the vehicle can no longer be started. The high frequency battery charger PRO25S ideal here to floating operation. All CTEK devices are easy to use, easy to connect ignition protected and polarity. The built-in security features to protect the electronics and battery. Due to a low ripple and noise of voltage and current, they are for safe use ideal for sensitive electronics. The battery of your vehicle must be to the load from the vehicle not be disconnected. Once set remembers the CTEK charger the last used settings. Also deep discharged batteries can be repaired. The charger can remain always connected, simply connect and forget over the years. Here a video to the CTEK PRO25.
CTEK PRO25 - how do you use yours? Here a video of the 8-stage charging process and functioning of the CTEK devices. CTEK 8-stage charging process - YouTube.
CTEK PRO25S charger (with normal supply - SCHUKO). CTEK charger cable for direct connection to the battery by means of "Terminal" and temperature sensor cables. Battery types: All types of lead-acid batteries, lithium-ion (LiFePO4), wet, MF, CA/CA, AGM, start stop (EFB), gel batteries. Battery power lead-acid batteries: 40-500 Ah. Lithium-ion battery power: 30 450Ah.
Output lead-acid batteries: 14.4 V / 15.8 V / 13.6 V, 25A max. LiFePO4 batteries output: 13.8 V / 14.4 V / 13.3 V, 25A max. Charging cable length: 2,00 m. Power cord length: 1.90 m.
Input: 220-240VAC, 50-60 Hz, 2.9 A max. Starting voltage: 2.0 v. Rear discharge current: less than 1 Ah / month. Ambient temperature:-20 ° C to + 50 ° C. Temperature compensation:-attached external charging voltage temperature compensation sensor.
Dimensions: 235mm x 130mm x 65mm. CTEK of maximum charging current. For more information please scroll.
CTEK Sweden AB Rostugnsvägen 3 SE-77670 Vikmanshyttan Sweden. The guarantee is valid throughout Europe.
A product is only broken if the product is not specified in the user manual of the product, the product specification, or if the errors in material or manufacturing defects is due. Products that have been opened (including a broken seal), intentionally damaged or otherwise modified or altered. Products that have been repaired by CTEK or its authorized representatives.
Products that have been used with consumables or accessories, which has been approved in writing by CTEK or supplied by CTEK. Improper use or failure to follow of the instructions for installation, commissioning, operation, maintenance i. Not in accordance with the operating and installation instructions.Unauthorized modifications, alterations or repair attempts. Vandalism, destruction by external influences and/or persons/animals. Failure to comply with the applicable safety norms and regulations.
Error caused by fire, water, snow, moisture or other liquids which are not specified for normal use. Products whose serial number has been defaced, modified or removed. Any application of the product that is not the design of the product and not the intended use specified by CTEK. Each installation and/or modifications, which prevents the intended use of the product. Normal wear and minor defects such as such as, but not limited to, corrosion, scratches, dents, rust, stains, as well as non-functional parts such as such as, but not limited to, plastics and coatings.Damage, fault, failure or defects by misuse, tampering, illegal use, negligence or any too long caused. Or errors, which were caused in other ways by the customer/user. Complaints sent directly by the end user to CTEK will not be accepted. In this case the customer has to bear the transport costs. Or sent back to the sender at his expense. MotoUnion Manuel Hetzel Eyachstrasse 32 72459 Albstadt. Defective products will be repaired at the expense of CTEK or replaced with an equivalent product. Faulty and classified as unrepairable products be scrapped by CTEK. Furthermore CTEK SWEDEN is not obliged to provide other guarantees than this. CTEK reserves the right to change the terms and conditions as a result of amendment (s) with respect to the availability of services, products or spare parts or for the purpose of compliance with any applicable policies, rules, regulations and Laws without prior notice to vary, modify or change. Autoladegerät Bagger Batterie Batterieladegerät Batterien. Baumaschinen Boot Bus compensation CTEK Dauerladegerät.
EFB Start Stop Batterien und Lithium Ionen LifeP04 geeignet. Lastkraftwagen LKW mit MODELL MXS MXS25 NEU.
PKW PKWLadegerät Quad Radlader Rasentraktor. PRO25S der MXS25 Nachfolger, neue Version. Reconditionierung Schiff Säure temperature Blei.
Supply Modus Netztgerät Dauerstrom Recond Erhaltungsladung. Temperaturkompensation Traktor Transporter V Volt Wagen. The item "Ctek MXS25 Successor PRO25S Charger Also for Lithium Start Stop Efb Batteries" is in sale since Monday, August 19, 2019. This item is in the category "Vehicle Parts & Accessories\Garage Equipment & Tools\Battery Testers & Chargers\Chargers & Jump Starters". The seller is "motounion" and is located in Albstadt.This item can be shipped worldwide.